2000W_eBike_Dual_Suspension_Electric_Mountain_Bike_58_8v_17Ah_MTX_HUB_MOTOR_01_zwvy

2000W eBike Dual Suspension Electric Mountain Bike 58.8v 17Ah MTX HUB MOTOR

2000W eBike Dual Suspension Electric Mountain Bike 58.8v 17Ah MTX HUB MOTOR
2000W eBike Dual Suspension Electric Mountain Bike 58.8v 17Ah MTX HUB MOTOR
2000W eBike Dual Suspension Electric Mountain Bike 58.8v 17Ah MTX HUB MOTOR
2000W eBike Dual Suspension Electric Mountain Bike 58.8v 17Ah MTX HUB MOTOR
2000W eBike Dual Suspension Electric Mountain Bike 58.8v 17Ah MTX HUB MOTOR
2000W eBike Dual Suspension Electric Mountain Bike 58.8v 17Ah MTX HUB MOTOR
2000W eBike Dual Suspension Electric Mountain Bike 58.8v 17Ah MTX HUB MOTOR

2000W eBike Dual Suspension Electric Mountain Bike 58.8v 17Ah MTX HUB MOTOR
EBike Dual Suspension Electric Mountain Bike MFX PURE RASCAL MUDDYFOX 58.8v 17Ah 250 – 2000W MTX HUB MOTOR. 250W – 2000W peak. 7 Speed Sprocket (21 speed total). 58.8V 17Ah LG Battery = 1kW. 2000W / 40A max power. Keylock (locks battery to mounting bracket). Mounting bracket for bike downtube (fixes to bottle holder). Full Sine Wave smart controller (programmable using the TFT display). Max Current – 35A. Max Voltage 14S Lithium (58.8V). Pedal sensor (8 Magnet) and thumb throttle support. 1 x Ebrake support (not currently installed or compatible with hydraulic kit, this comes separate in a box with other stuff and you have to install yourself). Colour TFT display with handlebar on/off switch and controls for settings menu etc. Front wheel original MFX rim with JOY through-axle. Shimano Hydraulic Brakes Front + Back (I have tested both brakes and have gone from 30MPH to completely stopped in about 3-4 seconds). Disk Brakes High Performance. Anti-Skid Pedal (Feet feel securely in place when placing onto pedals, this is extremely important when riding a fast eBike or off-road). There is about 1-1.5cm space between battery and rear suspension, this is good, this means the battery can be taken off and put on without having to remove any screws, simply unlock with key and slide on or off. The battery does not need to be removed to be charged, it can stay locked into place and has a small rubber flap (for waterproof purposes) that can be conveniently pulled aside to plug charger. Pedal-assist included and installed. BikeMate seat, comfortable and sport. Torque-arm included and installed. Lever-throttle included for no-pedal ride. Currently programmed to start on Level 1 so it uses about 400w without pedalling and starts off smoothly, gradually increasing in speed but no more than 15MPH on Level 1. Charger included for 58.8v 2A charging. This charges slowly which also prolongs battery lifespan and keeps temperature very low when charging. Display is high tech with settings available and easy to navigate controls UP SELECT (hold for power on/off) DOWN. It still has the film-protection attached to the screen. This is located in the left side pocket of the front bag add-on installed. This is because the piece that mounts on the handlebar has one side broken (repaired with glue but I prefer to keep the display hidden away as I don’t need to keep looking at how fast I’m going, Level 1 is always a max up to around 17MPH even with pedal-assist). Top speed reached 31.4MPH on slight incline with 92KG rider on full charge (hardly any wind that day, dry road). Currently the performance is limited to 15MPH (Level 1), but this can be changed easily with display and controls for off-road use. The eBike always starts on Level 1, but can easily be changed up or down with 1 press of button located next to rear suspension. Maximum speed increases with each level up to Level 5 which provides full power to the motor (please note this does use the battery quicker and so that’s why I always start on Level 1 to give me longer rides). Motor achieved 1.67kWh maximum power. Pedal-assist using around 210-255W, very easy to pedal. With this amount of power usage, the battery can last around just over 4 hours. AXIOM bike rack included, rated to hold up to 50kg weight. ROCKBROS bag included to complement the AXIOM bike rack. The bag is a 30L large and ultra-secure, can hold plenty of weight, up to around 15kg (may hold more but recommend not abusing the load capacity). Easily’grapples’ onto bike rack, and has a part on the middle that keeps the bag from jumping or moving around when riding the bike. This part is adjustable horizontally if you want to position the bag closer or further away, it also means you can switch sides from left to right and flip the direction of this part. Currently the motor performance is configured to take power from the battery slowly and efficienly, this prevents jumpy inputs and dramatic power. It gives a smooth ride. This means the power delivered will be gradual when using the throttle. If using thumb-throttle and pedal-assist at the same time, then the release of power will be in the same gradual smooth manner, but the acceleration will be increased exponentially, this helps alot when you want to go from 0 to 15MPH or more when off-road much quicker or if you want to move quickly ahead. For example, if you are travelling with the thumb-throtle on Level 1 (max 15MPH) and you want a boost, pedallling will provide a boost straight into Level 5 performance giving you maximum boost power. Display configured to turn on at Level 1 meaning the maximum speed is 15MPH (legal in UK for bike lanes), but this can be changed to higher level (up to level 5) if intended to be used for off-road use. You can change the power level from 1 to 5 easily by pressing up or down on the control component, or if you want to start at a different level when you turn the eBike on, then you can configure it to permanently (with each start/stop) like it currently is with Level 1. So if you want it to start at level 5 every time you turn it on, then you can change the settings using the display once and it will always start on level 5 when turning on. If you want it to start on the Level 1 settings which it is currently programmed to start in, but you want to increase or decrease the power available during that ride session, then you can simply press UP or DOWN on the control without having to enter the settings menu. 7 speed cassette and 3 speed middle, 21 speed total pedal. Please note that the Shimano speed changer for rear came with an 8 speed rear wheel, and the eBike hub motor is 7 speed. This has messed up the alignments but it is currently working on speed 3-4, which means it’s smooth and you can easily pedal without using the motor. The speed I change if I want to pedal slowly is the middle speed. All 3 speeds work and I usually only ever change between 2 and 3, and they both provide a smooth performance. The hub motor freewheel has had a maintenance, cleaned properly and fresh grease applied internally. When pedalling, the freewheel feels firm and feels like it turns properly. When using the motor and not pedaling, the freewheel allows the wheel to spin properly. When using the throttle and pedal at the same time, you get instant full power (1.67kWh) 75Nm torque with smooth acceleration, meaning can reach more than 21 MPH in 3-4 seconds on full charge. ROCKBROS rear bag currently modified with added insulation to store hot or cold food. This can be removed if you want without damaging the bag. The bag itself is designed to be 100% waterproof even in heavy rain. The bag also has a mesh pouch on the inside but only if the insulation is removed. No punctures or holes in the bag, no damage. Everything that comes with the bike, comes in original packaging (motor, bag, bike rack), and extras included. Extras include additional parts that can provide personal preference, for example, you can choose to swap the hydraulic brakes for the cable brakes that have ebrake support (motor power cuts off when pressing the levers of the brakes which prevents you accelerating as you apply brakes). Can be collected ready to ride off or if you want, it can be dismantled for easy transport with everything in its original packaging. If you want the bike dismantled, then everything will be put in their original packaging. The rear wheel will be provided with the eBike if you ever want to remove the motor wheel and attach the original rear wheel but please note, this rear wheel is currently being repaired and maintenance is being done on it so that it is like new condition. Current maintenance includes fixing spokes, cleaning cassette etc. However, no outer tyre will be provided with the original rear wheel as it has been taken off and put onto the eBike hub motor. I have personally cleaned the eBike properly and regularly during ownership, and applied lubrication where required. The reason why I have configured the controller to take power from the battery in a slow and smooth way is to provide a smooth performance and avoid jumpy rides when applying power to the motor. This also helps in prolonging the battery life by only using power that is required, in other words, the power taken from the battery is not from 0 to 100 (which may cause degration of performance of battery much sooner than expected), so I have configured it in this way to prolong the life of the battery, and to keep the controller and motor working smoothly and in colder temperatures. All this prolongs the performance and lifespan of all components. Is there anything wrong with it that affects the performance of the bike? No, there is absolutely nothing wrong with the bike. These motors are known to last a long time even with daily use. I live on the 2nd floor in a flat with narrow stairs. This bike weighs around 30kg in total. Is there anything changed since it was installed the first time? Yes, 3 things I have modified that do not affect performance, please read carefully so you understand exactly what’s been changed. 1 Component that holds display onto handlebar has 1 broken part (has now been properly repaired and glued), but can still be mounted. However, as the bike moves, the display was vibrating downwards and facing down and it. Also, after riding for a month, I didn’t like the idea of having an important part of the eBike just sitting on the front of the bike. I have decided to remove this and placed display into bag located in the front. The bag size is decent and compact. (not flimsy, the zips feel very secure and professionally crafted), perfectly fits this model of the mountain bike. This makes the bike look like a mountain bike on the handlebar (less stuff, less messy), and I can still ride the bike without having to check the display. I have ride this bike for about 3-4 months and the temperature never gets above 34 degrees celsius. 2 The controls (small rectangle mountable component) has been securely placed next to the rear suspension, this has been done as the wire from the controls and the display is short, and the only way I found which is decent. It is easy to turn on and off by holding the middle button for 1 second, and I can continue to ride with the thumb-throttle or by pedaling. 3 The battery bracket mount has been installed carefully so it does not vibrate much or shake when riding the bike. However, at some point during the first few days of riding the bike, one of the screws has been lost, and it was then that I decided to put 3 zip ties around it to keep it from vibrating. The battery is locked into the mounting bracket securely, and the mounting bracket has been locked into the bike frame securely. The battery can also be removed with its own keys supplied meaning no screws are needed to be removed to remove the battery. I have never removed the battery or the mounting bracket unless I decided to clean the bike completely. The battery can be charged very easily without removing screws. That’s all I consider to be faults, the motor, display, display controls and controller work perfectly. Everything works as it should, and it’s very fun and very useful. SR Suntour Front Fork with remote lock-on for suspension control. Easy to ride and feels smooth on road and off-road. High quality handlebar grip that holds steering bar. Strong extension for front fork including 2 extra length screws for personal adjustment. Lock-on grips (easy on/off without having to pull hard or use air pump to get them off). I have now installed the TFT display onto the handlebar with the control to show what it would look like with this setup (shown in pictures), but you can also remove and store it in the front with the bag for a clean handlebar as previously shown. The picture of the TFT display Settings page show the different types of variables that can be changed to modify the performance of the hub motor to your preference. The display also supports headlight feature with on/off. If you have any questions, feel free to ask. The item “2000W eBike Dual Suspension Electric Mountain Bike 58.8v 17Ah MTX HUB MOTOR” is in sale since Tuesday, July 7, 2020. This item is in the category “Sporting Goods\Cycling\Electric Bikes”. The seller is “arpas87″ and is located in Dagenham. This item can’t be shipped, the buyer must pick up the item.
  • Wheel Size: 26 in
  • Colour: Blue
  • Department: Men
  • Bike Type: E-Mountain Bike
  • Motor Power: 2000W
  • Model Year: 2000
  • Gear Change Mechanism: Derailleur Gears
  • Shifter Style: Trigger Shifter
  • Suspension Type: Full Suspension (Front & Rear)
  • Motor Type: Rear Hub Motor
  • Brake Type: Disc Brake – Hydraulic
  • Number of Speeds: 21 Speed
  • Voltage: 58.8

2000W eBike Dual Suspension Electric Mountain Bike 58.8v 17Ah MTX HUB MOTOR