48v 60v 72v 60A high power brushless programmable motor sine wave controller for electric bike or electric scooter brushless electric motor. Plus UKC1 color LCD display. Mostly applicable for 1000W, 1500W, 2000W, 3000W motors. The controller can be used with either 48v, or 60v, or 72v batteries. The controller is sine wave motor control technology, which provides very smooth, silent, and efficient motor operation, while providing good torque for the motor. The controller has got an auto-detect function, which means that it will automatically match this controller with your motor specific phase / Hall sensor combination. Which makes it much easier for initial setup. If you also need a throttle, brake levers, and pedal assist, then here is my other listing. This controller can work with hall sensors. Or in sensorless mode. If Hall sensors in your motor fail – this controller still can propel the motor in sensorless mode. The controller can be programmed via the UKC1 display, and has many very useful settings for the motor / throttle / pedal assist / power / speed control and so on. Upon request I could provide help with setting up this controller via a video chat, for free up to 20 minutes. If more help is needed, then I could provide further help at a reasonable price. Power output, can be programmed from 250w to 4800 Watts, by settings the Amperes. Intelligent dual-mode (sensored and sensorless) brushless sine wave motor controller. The controller can be used with either throttle, or pedal assist, or both. Dimension: 185 108 57 mm. Mosfet :18 high power Mosfets. Maximum current : 60 ± 1A. Rated voltage : DC 48V, 60V, 72V. Brake input: Low-Level. Low voltage protection: DC 38±0.5V. Cable length: all about 13-18cm. Weight: about 1025g. Mostly suitable for: 1000w / 1500w / 2000w / 3000W motors. The controller is suitable for both for hub motors and mid drive motors. Type: LCD UKC1 color Display, with USB charging function. Voltage: 48V, 60V, 72v. SM plug type (while rectangular connector type). Communication protocol: UART Communication Protocol No. Applicable handlebar diameter: 22.2mm. Function:Power, speed, gear, etc. Freel free to ask questions.
