Ebike Conversion Motor Kit Electric Bicycle Wheel Kit 26 27.5 100oW 150oW 48V

Noted:Battery not included. 1 front or rear Motor wheel(20/24/26/27.5/28/29inch 700C). 1 pair Power cut-off Brake lever. 1 set Twist Throttle. 1 Pedal Assistant Sensor. Conversion Kit not include tire. If you need a tire. 36V 250/350/500W about 20-35km/hour. 48V 500W about 40-50km/h. 48V 1000W about 45-55km/h. (different wheel size, road&weather condition and rider’s weight will have different speed). Brushless gear Hub Motor for 36V. Brushless Non-gear Hub Motor for 48V. Rim: Double-wall Aluminium Alloy Rim. Wheel Bottom bracket: Rear 135mm-142mm or Front 100mm. 25-35NM for 36v 250W 350W 500W. 30-40NM for 500W 1000W. 320 for 36V 250W 350w. 350 for 36V 500W. 470 for 48V 500W 1000W. 540 for 48V 1500W.

36V 13ah Battery for E-bike Bafang Electric Bike 500W 750W motor Rear downtube

36V 13ah 350W 500W 750W Battery for Ebike Bafang Electric Bike Mid motor Rear. Rated Voltage / capacity:36V / 10Ah. Battery Size(mm) :as the picture shows. Component: Li(NiCoMn)O2. Discharge Standard current:10A-13A. Discharge Max current:25A. Discharge Cut-off voltage:30V. Discharge cycle life:1000 times. Discharge method :Bottom discharge. Fuse Installation position:Inside on the PCB. Fuse Diameter(mm):5. Fuse Length(mm):30. PCB board Protection:Over charge, over discharge, over load and short circuit. BMS board Protection:BMS is used to supervise battery by measure its voltage, temperature, current and SOC (State Of Charge), give out alarm under wrong circumstance, cut off electric power link in severe situation in order to protect battery and make its life longer. BMS can balance energy among batteries to make them more identical and expand its discharge cycle. 1 x Lithium Battery with ABS case(Base discharge). 1 x Mounting Fixed Plate.

December 2024
M	T	W	T	F	S	S
« Nov
						1
2	3	4	5	6	7	8
9	10	11	12	13	14	15
16	17	18	19	20	21	22
23	24	25	26	27	28	29
30	31