Of E-bike’s battery as same as your E-bike’s. The demension of item. L390mm W110 mm H75 mm. / 15.354.332.95 inch. Please ensure that the positive. Pole of the discharge port. Positive pole of the plug. So that aviod short circuit. If you need to discharge cable connect to bike controller power cable, please mind the the. Red wire is positive, the black wire is negative. 1 x Lithium Battery. 1 x User Manual. 1 x Battery Fixed Plate. Battery Type:Fish Lithium-ion. Electric Bike Part Type:Battery. Rated Voltage / capacity: 48V / 13Ah. W: 3.26KG/3.66KG. Inch:L154W43.5H29.5. Batteries combinations:13-S, 6-P. Component:Li(NiCoMn)O2. Recommend to use: 350W-750W. Charging time:Standard 0.2C5A×5hrs. Suit for:350W 500W 750W Motor. Certification:CE, RoHS, MSDS. Compatible Bike Type:BMX Bike, Universal, E-Cargo Bike, E-City Bike, E-Cross Bike, E-Folding Bike, E-Mini Bike, E-Mountain Bike, E-Recumbent Bike, E-Tandem Bike, E-Trekking Bike, E-Tricycle, Pedelec. Cycle life:1000 times. Charging time:Standard 0.2C5A×5hours. Charging time:Quick 0.5C5A×2hrs. Charge Max current: 2A-5A. Charge Max voltage: 54.6V. Installation position:Inside on the PCB. PCB board Protection:Over charge, over discharge, over load and short circuit. BMS board Protection:BMS is used to supervise battery by measure its voltage, temperature, current and SOC (State Of Charge), give out alarm under wrong circumstance, cut off electric power link in severe situation in order to protect battery and make its life longer. BMS can balance energy among batteries to make them more identical and expand its discharge cycle. Avoid charging under the sun exposure. Please fullfill the electricity first before using. There are a number of factors that affect the performance and hence the range of your electric bike. Terrain, riding pattern, tyre pressure, user weight and temperature all play a part. Time is a factor too, all batteries deteriorate with time, whether in use or not. Obviously, if the terrain is hilly, you are likely to use more power. Also, the surface you are riding on can make a difference. A smooth tarmacked surface takes less effort. A softer surface, such as sand, or a loose substance like gravel takes more effort. Keeping tyres pumped up makes a big difference because soft tyres have more rolling resistance and drag. Tyres pumped to the correct pressure will give you more miles from your battery. In general terms: If you are somewhere where it would be hard work to ride an ordinary bicycle, then it will probably use more from the battery on your electric bike than easier conditions. The battery is not allowed to be close to the high temperature heat source. Avoid charging in direct sunlight. Must be charged with a dedicated lithium battery charger. There should be no metal objects falling into the battery interface to avoid short circuit. Do not place the battery in a damp place or in water. Do not disassemble or modify the battery. Do not apply external force to the battery or drop it at high altitude. When the battery is not in use, it should be fully charged and stored in a dry and cool place. And a full charge every 2 months. It is bottom 2 pins connection. The size is 39. M11cm7.5cm(Length x width x hight), please make sure this size can be installed to your bike. Please mind the the red wire is positive +, the black wire is negative. Battery Type:Lithium Ion (Li-Ion). Recommend to use:200W-360W. Discharge Standard current:25A. Discharge Cut-off voltage:30V. Discharge cycle life:1000 times. Discharge method :bottom discharge. Charging time :Standard 0.2C5A. Charging time:Quick 0.5C5A. Charge Max current:2A-5A. Charge Max voltage:42V. Fuse:Installation position:Inside on the PCB. Fuse:Diameter(mm):5. Fuse:Length(mm):30. Compatible Bike Type:Universal, Electric Bike, E-Cargo Bike, E-City Bike, E-Cross Bike, E-Folding Bike, E-Mini Bike, E-Mountain Bike, E-Recumbent Bike, E-Tandem Bike, E-Trekking Bike, E-Tricycle, Pedelec. BMS board Protection:BMS is used to supervise battery by measure its. Voltage, temperature, current and SOC (State Of Charge), give out alarm. Under wrong circumstance, cut off electric power link in severe. Situation in order to protect battery and make its life longer. Balance energy among batteries to make them more identical and expand. With Aluminum case(base discharge). This item is in the category “Sporting Goods\Cycling\Bike Components & Parts\Electric Bike Components”. The seller is “yaj9700″ and is located in this country: GB. This item can be shipped to United Kingdom.
- Model: 48V 13Ah 2 Port
- Package included: Only Battery
- Custom Bundle: No
- Item Length: 390mm
- Chemical Composition: Li-Ion
- Discharging position: Bottom
- Colour: Silver
- Energy: 360WH / 624WH
- Voltage: 36V / 48V
- Item Height: 110mm
- Component: Li(NiCoMn)O2
- Case Material: ABS+Aluminium alloy
- Unit Quantity: 1
- Number of Items: 1
- Item Width: 75mm
- Part Type: Battery
- Compatible Brand: Universal
- Cell quality: 2500mAh
- Compatible Model: 48V Ebike
- Set Includes: Bottom Bracket, Battery
- Material: Aluminium Alloy
- Battery Type: Lithium Ion (Li-Ion)
- Certification: CE,RoHS,MSDS
- Brand: KEPEAK
- Type: Battery
- Batteries combinations: 10-S,4-P/13-S,5-P
- Battery Capacity: 10 Ah / 13Ah
- Compatible Bike Type: Universal, E-Cargo Bike, E-City Bike, E-Cross Bike, E-Folding Bike, E-Mini Bike, E-Mountain Bike, E-Recumbent Bike, E-Tandem Bike, E-Trekking Bike, E-Tricycle, Pedelec
- Electric Bike Part Type: Battery
- Impedance: ≤130mΩ / ≤150mΩ
- Item Weight: 4KG